In a prior article we centered on the key items to consider when buying LED Strip Lights for the very first time. Now we are likely to get you through the following phase; installation. Installing your LED Strips may be anything from quite simple to very difficult, but ultimately it all depends on what outcome you are attempting to achieve together with your lighting system. For instance, introducing a 1 metre strip of LED lighting into your kitchen cabinet may be a lot more easy than using 20 metres of RGB LED Strip Lights to outfit a team and run this on DMX Control. Regardless of what you do there are always a few universal items to consider and this information will get you through some of them.
We shall start with the LED Tape itself. This consists of a long bit of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length led strips lights. There are a few different items to consider here including, LEDs per metre, LED chip size, strip light colour and length. Strip Lights are available in two LED per metre varieties, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has doubly many LEDs and will be a lot brighter compared to the former. They are designed to be used in a lighting context where they’re forced to contend with background illumination. So for instance if you want to utilize them in a daylight setting, such as a shop street display, or add them to an area that already has general illumination and still want them to be observed, you need to choose 60 LED per metre as their sharper light output makes them ideal for these purposes. Apart from this a 30 LED per metre strip will be able to deal with other lighting arrangements, such as for example club setups, or anywhere else they don’t need to contend with background lighting.
Whenever you go through the specifications of strip lighting you will usually notice a series of four numbers that to most people might not mean a lot. These actually refer to the size of the person LEDs on the strips. Typically you will find chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The main element difference between these two forms of chip size may be the consistency of light they produce. Smaller LEDs can create an even more jagged and inconsistent effect, while larger LEDs can provide an even more even spread of light.
Another decision to produce is exactly what colour strip light you want to buy. They are usually available in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the end result. They may be used to aesthetically to improve the looks of an area by the addition of layered or accent lighting, or they can add functionality to kitchens, bathrooms or offices where they may be used as task lighting to help work. RGB LED is a direct substitute for old fashioned disco lighting and offers a large number of programmable effects. Typically they will run directly from a remote control which works along with a red eye sensor attached involving the strip light and transformer. However, DMX Control can also be an option. This is a type of advanced effects programming that uses an industry standard signal to control the brightness, colour and frequency of the lights.
The most obvious consideration to produce is the precise period of strip lighting that you require. This depends upon the type of your setup and how complex your intentions are. Usually most lighting arrangements can be achieved with an individual strip. Strip Lights are available in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths may be ordered so call your provider to get out. Lengthening or shortening strip lighting can be carried out all all on your own as well. To shorten a reel light can be carried out by simply cutting the strip at among its cutting points spaced approximately 5cm apart along the length of the light. To attach two pieces of strip together, and thereby increase the length of the light, you will be needing a soldering iron and some two core wire. Simply solder these wires for their respective plus and minus solder points by the end of the strip light where the cut has been made and do the same on one other strip to perform the connection. This process may be used to achieve a little extra length, especially when trailing them around a sizable corner.
This informative article has given you a some of the main specifications related to LED Strip Lighting and how to ensure you obtain exactly the right light you need for your purposes. Consider additional articles on the best way to make sure you meet the power requirements of your lighting system.